Search
Get It Growing for 01/02/26
The cooler months are ideal for planting many tree species in Louisiana. Staking newly planted trees can offer much-needed support as they start to put down roots — especially in the case of large trees.
“When you get that instant effect from a mature tree being put into the landscape, you’ve got a lot of top-heavy growth, but you don’t have the root ball to accommodate that,” said Damon Abdi, assistant professor of landscape horticulture at the LSU AgCenter Hammond Research Station. “Staking is a great method to be able to give a little bit of stability to the tree as it’s integrating into its new landscape.”
Staking prevents the root ball from shifting and incurring damage while the tree acclimates to its surroundings. To reap the benefits of staking, however, you must do it properly. Follow these steps from Abdi for the best results.
Gather two to three stakes about 6 feet long. Many people use metal fenceposts or rebar.
Place the stakes in the native soil surrounding the tree, spacing them equally.
“You don’t want the stakes to be within the root ball, or else it defeats the purpose,” Abdi said.
Drive the stakes about 2 feet into the ground.
Next, you’ll need to connect the stakes and the tree. Using the proper materials is key.
“You don’t want a thin metal material such as a wire, or else it’s going to act like a cheese cutter and cut through the trunk,” Abdi said. “Instead, you want something that’s nice and broad to displace the pressure over a wider area.”
Polyester webbing or a similar soft, woven strap material is a good choice. You also can use plastic chain lock tree ties, which are more discreet. Another option is thin rope — again, not wire — threaded through a short piece of hosepipe, which provides a protective shield around the trunk.
Loop the straps or other ties around the tree about one-third to two-thirds of the way up the trunk, leaving some wiggle room.
“Regardless of what material is used, if it is too tight on the trunk, it could cause problems,” Abdi said.
When tying off to the stakes, pull the material just taut enough to keep the tree upright. The tree should still be able to move around a little.
One of the most common mistakes people make is leaving trees staked too long.
“If you leave those straps and those stakes on too long, they’re going to become one with the tree and cause some issues,” Abdi said.
Besides damaging the bark on the trunk, an excessively long staking period can make a tree weaker and more prone to breaking or blowing over in storms. This may sound counterintuitive, but think about it: If a developing tree isn’t allowed to sway in the wind, it will never “learn” that it needs to grow more roots and a thick, sturdy trunk to support itself.
Abdi advises removing staking materials after about one season of growth. That is typically enough time for a tree to get established and safely stand on its own.
LSU AgCenter horticulturists Damon Abdi and Jason Stagg offer tips for staking trees.
Staking can provide stability for newly planted trees. Photo by Olivia McClure/LSU AgCenter
Metal fenceposts are a popular choice for tree stakes. Photo by Olivia McClure/LSU AgCenter
Damon Abdi, assistant professor of landscape horticulture at the LSU AgCenter Hammond Research Station, demonstrates how to wrap a strap around a tree to connect it to stakes. Photo by Olivia McClure/LSU AgCenter
Damon Abdi, assistant professor of landscape horticulture at the LSU AgCenter Hammond Research Station, displays a variety of materials that can be used to connect trees to their stakes. From left are thin rope to be threaded through a piece of hosepipe barrier, plastic chain locks and woven straps. Photo by Olivia McClure/LSU AgCenter
Trees generally should not be staked for more than one growing season. When staking materials are left in place too long, they can girdle a growing tree and cause unsightly damage to its trunk. Photo by Olivia McClure/LSU AgCenter
