Stabilizing and Bending of Wood for the Hobbyist

Todd F. Shupe  |  1/24/2011 11:28:57 PM

Lumber scraps and cross-sections of angle cuts sawed from small logs or large limbs can be made into attractive items, but only if the wood is first treated with polymers and then properly seasoned, or if the wood is initially seasoned following special techniques. This publication describes some techniques of stabilizing and bending wood for hobbyists. (PDF format only)
Rate This Article:

Have a question or comment about the information on this page?

Innovate . Educate . Improve Lives

The LSU AgCenter and the LSU College of Agriculture

Top