Varying your mowing pattern can cause you to spend a little more time mowing, but the result will be a greatly improved appearance in your turfgrass.

Finishing (or grooming) mowers typically have (two or) three blades and are designed for quality mowing of turfgrass. They have multiple gage wheels and rollers that allow a relatively low cutting height with minimal scalping.

Riding mowers, lawn tractors, lawn and garden tractors, and garden tractors are covered by several safety standards that are designed to protect you, the operator.

Many people use a rotary cutter – often referred to by the trade name Bush Hog – to cut grass and weeds. But in too many cases, the implement is not correctly adjusted. This can cause premature wear, poor quality of cut and an excessive power requirement, warns Dr. Dick Parish, an engineer at the LSU AgCenter’s Hammond Research Station.

Do you get what you pay for when buying a mowing tractor? There is certainly a wide range of prices; in fact, you can easily pay twice as much for a lawn tractor at a major farm equipment dealer as you would pay for a lawn tractor with the same horsepower and mowing width at a discount store. What do you get for the additional money?

A power lawnmower requires regular maintenance if it is to provide reliable service. Most of the maintenance steps are easy and can be done by a reasonably handy homeowner.

Power lawnmowers are available with a wide array of features. Some of the features are helpful; some less so. It can be a challenge to optimize both features and price.

You might think that riding mowers and lawn/garden tractors are small and low to the ground so overturns are not a problem. Unfortunately, this is not the case. Riding mowers and small tractors can overturn to the side or rear fairly easily.

It seems obvious that a wider or faster mower will cover a lawn faster than a narrower or slower mower, but this is not always true - and seldom will the increase in cutting rate be proportional to the increase in width or speed.

All rotary cutters are inherently dangerous. The thrown object hazard is not fully recognized by everyone, yet it can cause injury, blindness or even death.