Two questions of interest to prospective purchasers are: How much do riding mowers and small tractors in the various classes cost and how long can I expect one to last?

Collecting antique garden tractors is a rapidly growing hobby, requiring less room and less expense than collecting antique farm tractors.

Many people use a rotary cutter (often referred to by the copyrighted name “Bush Hog”) to cut grass and weeds, but, in too many cases, the implement is not correctly adjusted. This can cause premature wear, poor quality of cut, and an excessive power requirement.

Mid-mount mowers for lawn, garden, and compact tractors typically have (two or) three blades and are designed for quality mowing of turfgrass. They are not designed to cut tall, weedy grass. They have multiple gage wheels and rollers that allow a relatively low cutting height with minimal scalping.

Finish (or grooming) mowers typically have (two or) three blades and are designed for quality mowing of turfgrass. They are not designed to cut tall, weedy grass. They have multiple gage wheels and rollers that allow a relatively low cutting height with minimal scalping.

Farm and grounds maintenance equipment is often exposed to rain, high humidity, fertilizer, pesticides and corrosive plant materials (such as grass clippings). The manufacturers of that equipment have taken steps to try to protect the equipment and reduce the potential for corrosion.

There are three primary transmission systems used in riding mowers and the various classes of mowing tractors.

One of the factors that most affects both the capability of a lawn/garden tractor, and the price, is the engine.

You will save money in the short run at discount stores and mass merchandisers. You will pay more but get better quality equipment and service with dedicated lawn and garden dealers or farm equipment dealers.

Mid-mount rotary mower decks are common on lawn tractors, garden tractors, subcompact tractors and smaller compact utility tractors. There are two ways that these decks can be mounted, and the mounting method affects adjustment and operation.

Riding mowers, lawn tractors, lawn and garden tractors, and garden tractors are covered by several safety standards that are designed to protect you, the operator.

Do you get what you pay for when buying a mowing tractor? There is certainly a wide range of prices; in fact, you can easily pay twice as much for a lawn tractor at a major farm equipment dealer as you would pay for a lawn tractor with the same horsepower and mowing width at a discount store. What do you get for the additional money?

You might think that riding mowers and lawn/garden tractors are small and low to the ground so overturns are not a problem. Unfortunately, this is not the case. Riding mowers and small tractors can overturn to the side or rear fairly easily.

Implements, including mower decks, can be attached to tractors in several ways and in several locations. The larger the implement and tractor, the more likely an upscale, easy-to-use hitch will be provided. Naturally, the upscale hitch systems cost more.

It seems obvious that a wider or faster mower will cover a lawn faster than a narrower or slower mower, but this is not always true - and seldom will the increase in cutting rate be proportional to the increase in width or speed.

Riding mowers, lawn tractors, lawn and garden tractors, and garden tractors are large and powerful. They can be dangerous if not used safely.

A mower deck can’t cut grass unless it is connected to the tractor engine. This is usually done in one of two ways, with some possible permutations.

Shopping for a riding mower or mowing tractor requires several choices – including the transmission, according to an engineer with the LSU AgCenter’s Hammond Research Station.

You have many choices in lawn/garden tractors; size, quality and cost vary widely. Selecting the correct tractor for your use can be bewildering. This information can help you select the right tractor and use it efficiently and safely.