Two questions of interest to prospective purchasers are: How much do riding mowers and small tractors in the various classes cost and how long can I expect one to last?

The advantages of an ASAE standard quick hitch include faster, easier and safer hitching. To use a ASAE standard quick hitch, the implement hitch geometry must conform to the ASAE standard.

Three types of rear tires are available for compact utility tractors, and at least five types are available for the front. The different types of tires serve different purposes. You can select agricultural tires for general farming, turf tires for use on turfgrass, or compromise with an industrial tread.

The tractor by itself is of limited use. The tractor furnishes the power, but the implements allow the tractor to do useful work. Varied implements are available for compact tractors from both the tractor manufacturers and short-line manufacturers.

Finish (or grooming) mowers typically have (two or) three blades and are designed for quality mowing of turfgrass. They are not designed to cut tall, weedy grass. They have multiple gage wheels and rollers that allow a relatively low cutting height with minimal scalping.

Mid-mount mowers for lawn, garden, and compact tractors typically have (two or) three blades and are designed for quality mowing of turfgrass. They are not designed to cut tall, weedy grass. They have multiple gage wheels and rollers that allow a relatively low cutting height with minimal scalping.

Many people use a rotary cutter (often referred to by the copyrighted name “Bush Hog”) to cut grass and weeds, but, in too many cases, the implement is not correctly adjusted. This can cause premature wear, poor quality of cut, and an excessive power requirement.

Although most people opt for small engine-driven generators, there are some real advantages to a generator that connects to a tractor power-take-off (PTO).

A common problem with hydraulic cylinders is rust and pitting of the cylinder rods. If equipment that incorporates hydraulic cylinders is stored outside with the cylinder rods extended, the rods are exposed to weathering. Eventually, the rods will begin to show specks of rust that develop into pits. Once rusting and pitting occur, the rod will destroy the cylinder seal the next time it is activated.

When performing such light-duty operations as mowing grass or making hay, it is sometimes possible to reduce fuel consumption by shifting to a higher gear and reducing engine rpm.