LSU AgCenter
TOPICS
SERVICES
twittertwitter
facebookfacebook
audioaudio
videovideo
labslabs
facilitiesfacilities
weatherweather
calendarcalendar
rssrss
blogsblogs
Go Local
4-H
Forever LSU
eExtension.org
   Forestry
 Home>Environment & Natural Resources>Forestry>

Stabilizing and Bending of Wood for the Hobbyist

Description:
Lumber scraps and cross-sections of angle cuts sawed from small logs or large limbs can be made into attractive items, but only if the wood is first treated with polymers and then properly seasoned, or if the wood is initially seasoned following special techniques. This publication describes some techniques of stabilizing and bending wood for hobbyists. (PDF format only)

Primary Audience:
General

Publication #:
2643

Cost Hard Copy:
online only

Resource Updated:
1/24/2011 11:46:58 AM

bending wood

To save, right click on file and select "Save Target As..."

Get Adobe Reader

Last Updated: 1/24/2011 11:46:58 AM

Have a question or comment about the information on this page?
Click here to contact us.